B&C North Charleston Insulation is an insulation contractor based in North Charleston, SC, sealing and insulating attics and crawl spaces for homeowners in Goose Creek. Call (843) 278-0240 and I'll come out and look at your house.
(843) 278-0240
Goose Creek has everything from older ranch houses on crawl spaces to two-story homes with a bonus room over the garage, and the call usually sounds the same: it's hot upstairs, the floors are cold in winter, or the power bill keeps climbing. In a lot of these houses the air handler and ductwork sit in the attic, so what's up there affects how well the whole house cools.
Under the older houses, the crawl space takes all the damp air we get here, and we often find batts that have sagged off the floor or gone wet. That's why I look at the attic and the crawl space together before I tell you what your house needs.
We reply to every call and form within one business day. I'll set a time to come out to your Goose Creek house, look at the attic and crawl space, and write a free estimate step by step so you can see what goes where. No pressure, no obligation.
(843) 278-0240In Goose Creek we spend most of our time in attics and crawl spaces. Up top, that usually means air sealing first, closing the gaps around can lights, pipes and the attic hatch, and then blown-in insulation, loose fill blown through a hose evenly out to the eaves without burying the vents. Under the house we replace sagging or wet insulation and put down a vapor barrier where the ground keeps the crawl space damp. Where old insulation is soaked or full of droppings, we pull it out before anything new goes in, and where the ducts live in a hot attic, spray foam is worth a look.
Goose Creek issues its own building permits through the city's Administration department, which also handles the city's business licenses, so that's the office to ask if you want to check on a company before it works on your house. The city's permit list names electrical upgrades and contractor roofing work and doesn't mention insulation, so I don't guess. Before we schedule, I check what the city asks for at your address, and if your job needs a permit, we take care of it before we start, which makes the city's review part of your start date.
What moves the price is what's already in the attic: how many inches are up there, whether old material has to come out first, and how many gaps need sealing. The schedule turns on the same things, since removal adds a step before anything new goes down, and I'll tell you which of those your house needs once I've seen it. We do the same work in Hanahan and across the cities around North Charleston, and if yours isn't listed, call and ask.
I spent years servicing equipment in attics and crawl spaces before I started this business in 2023, so I look at the ducts and the leaks around them, not just the depth. I come out to every job, and our installers work with me or a lead installer on site.
Insulation laid over a leak or a wet spot just hides it, so we work in order. Soiled or damp material comes out, the gaps get sealed, the eave vents stay clear so the attic can breathe, and the new insulation goes down full depth out to the edges.
If your attic is in decent shape and the real problem is a few open gaps, I'll tell you that instead of selling you work your house won't use. We're licensed and fully insured. Satisfaction guaranteed. Call (843) 278-0240 or send the form to get started.
There's no flat price, because it's set by what we find up there, as covered above. The biggest swings come from pulling out old soaked insulation and from choosing foam over loose fill, while a straight top-up over clean, dry insulation sits at the low end. Your estimate breaks the job into steps so you can see what each one adds.
Residential permit requests in Goose Creek are submitted online through the city's permit portal. If your insulation job needs one, we handle the request ourselves before we start, so you don't have to.
Usually it's hot attic air getting in through unsealed gaps around can lights, pipes and the hatch, plus insulation that's deep in the middle and thin at the edges, which is backward. When the ducts run through that same attic, the cooled air warms up before it reaches the rooms. Sealing those gaps is usually where we start.
That's set by what has to happen before new insulation goes down, so I'll give you the plan after I've seen the attic. A top-up over clean, dry insulation is the shorter kind of job, while clearing out old material and sealing a lot of gaps adds steps. Either way, our installers work with me or a lead installer on site.
With blown-in you can usually stay home, though we'll ask you to keep kids and pets away from the hose and the attic hatch while we work. Spray foam is different, because the foam maker sets a re-entry time, how long before you can come back inside, and we follow it. I'll tell you that wait ahead of time so you can plan where everyone goes.
Sealing the gaps and topping up blown-in usually does the job, but when the air handler and ducts live up there, spray foam can make more sense. Foam costs more, and it seals air while it insulates, which brings the ducts inside the part of the house you're cooling. If blown-in will do, that's what I'll recommend.
